DCI GUNS AEP/Submachine Gun AEG Side Air Ventilation Piston Head POMDCI630001
Description
1) Side Air Ventilation System: The through-holes in the sides of the piston head prevent excessive O-ring expansion and provide consistent velocity in all grease conditions. It also reduces the negative pressure when pulling the piston, contributing to high cycle and high efficiency customization! By using a side air ventilation system to prevent excessive O-ring expansion, and by using G.A.W.'s FRUS-O-rings, we were able to develop a piston head with low frictional resistance and stable initial velocity. Stability of the velocity is a major factor in improving the accuracy of the hit. Low frictional resistance is also a major factor in saving battery power and reducing the wear and tear on the motor brushes. It is expected to be effective.
2) G.A.W.'s FRUS O-ring: Specially treated O-ring with a coefficient of kinetic friction of less than 1/5 that of conventional NBR (nitrile rubber) O-rings. Non-adhesiveness to almost all metals prevents the O-ring from sticking to the cylinder. Ideal for high rates of fire and long life.
3) Compatible with G.A.W.'s AOE adjuster spacers for electric guns. It is possible to add AOE adjuster spacers without modification. The AOE adjuster spacer is not included.
4) Adopts a round design in consideration of the cylinder's inner wall: The piston head has a slightly smaller diameter and a round shape at the front and rear of the piston head to prevent damage to the inner wall when
the piston moves unexpectedly in the cylinder.
5) Thrust bearings are used: A thrust bearing is used in the spring catching area to prevent spring slippage and ensure smooth operation.
6) Material: POM
2) G.A.W.'s FRUS O-ring: Specially treated O-ring with a coefficient of kinetic friction of less than 1/5 that of conventional NBR (nitrile rubber) O-rings. Non-adhesiveness to almost all metals prevents the O-ring from sticking to the cylinder. Ideal for high rates of fire and long life.
3) Compatible with G.A.W.'s AOE adjuster spacers for electric guns. It is possible to add AOE adjuster spacers without modification. The AOE adjuster spacer is not included.
4) Adopts a round design in consideration of the cylinder's inner wall: The piston head has a slightly smaller diameter and a round shape at the front and rear of the piston head to prevent damage to the inner wall when
the piston moves unexpectedly in the cylinder.
5) Thrust bearings are used: A thrust bearing is used in the spring catching area to prevent spring slippage and ensure smooth operation.
6) Material: POM
MCL Interglobal official distributor of DCI Guns.
At MCL Interglobal we offer you a wide range of Airsoft products and tactical equipment.
If you are a store in the sector, register as a wholesale customer and get the best price on DCI Guns products.